CircuitMaster 4000 m introduces Saelig active precision oscilloscope

CircuitMaster 4000 M active precision oscilloscope combines the power of a 100 MHz 10-bit DSO and a digital Voltmeter to 0.1%, with exclusive testing techniques to provide the multiple diagnostic capabilities in a single unit.  Designed to simplify the secure research of fine pitch PCB, CircuitMaster 4000 M is unlike any other oscilloscope (usually 8-bit devices), providing innovative test and measurement functions for the detailed analysis of the circuit.  With two analog input channels, as well as an external trigger, the CircuitMaster 4000 M also offers four digital inputs adjustable threshold for logic signals, making it useful for mixed signal applications. For multiple signal acquisition, a 40-channel connector is provided for use with IC or PCB connectors. This accessory can be used as double-channel 20 for comparison and signal acquisition in real time.

While the CircuitMaster 4000 M can operate as a conventional oscilloscope with standard features and measurements, its built-in accurate Voltmeter (0.1% 24-bit) provides an accurate reading of the voltage probed to display simultaneously the signal waveform.  Pedal makes sampling probe measurements easier and safer as well.

Other display options can provide useful signal analysis capabilities.

The unique CircuitMaster 4000 m Active Mode offers DC or AC signal outputs on the same channel used to measure an input signal.  This measures the active response from a test to a stimulus, detect circuit conditions not visible with conventional instruments. Alternatively, this mode can be used as a function generator to inject signals to a Board, with the second channel to be used to monitor the response in a different point in the circuit, checking the phase delay, for example.

Can be a challenge finding a short-circuit or an open circuit in a PCB powered-both return a 0V voltage with a voltmeter or oscilloscope. But with CircuitMaster 4000 m mode active, injecting a small DC signal to the circuit and measure the response gives the user a clear indication of the fault condition. With an open circuit (no current) voltage output of CircuitMaster 4000 M remains unchanged, but with a short circuit, the voltage will drop almost completely.  An additional capacity-the FirmFlex mode -provides the most useful information-it can assess the strength of a node, i.e. their ability to sink or source of current in a circuit properly.

The CircuitMaster 4000 m can quickly and easily perform analog signature analysis (or VI tests), a technique for investigating voltage-current characteristics of energized devices node. The resulting curve can indicate resistive, capacitive, inductive and semiconductor characteristics to detect flaws in a leaky diode components, for example, or to compare known good devices and suspicious. For additional fault detection capabilities, the CircuitMaster 4000 m scan mode can perform automatic tracking of the curve, showing the amplitude and phase for several variations of voltage and frequency.

The TestFlow Manager software provided allows users to create automated test sequences in a simple structure, step by step, personalized with photos, diagrams, instructions, PDF datasheets or Web material. A graphics option can also be used to guide the test procedures, allowing users to enter comments that will appear in a final report. The resources to save and share test data and procedures make CircuitMaster 4000 M useful for various seasons or geographic locations.

Made by ABI Electronics Ltd., a leading manufacturer of test equipment embedded, European CircuitMaster 4000 M is now available from Saelig Company, Inc. Fairport, NY.  For detailed specifications, free technical assistance or additional information, contact 1-888-Saelig 7SAELIG

View the original article here

NTI introduces redundancy Switch for VGA

Network Technologies Inc (NTI) announces the addition of redundancy switch PRIMUX ® as an optional support for their popular VGA KVM matrix Switches via CAT5. Switch redundancy can instantly switch all user stations and connections from the host adapter to switch an array of back-up if the primary drive fails.

The redundancy switch PRIMUX RDSW-restores all of the connections between users and servers if the primary VGA KVM Matrix Switch PRIMUX needs to be taken out of service. The position of a switch in the drive determines that switch Matrix is used. With dual redundant AC power, the unit, without interruption, it automatically switches to the second source of energy if it fails the first energy source. These guarantees are ideal for broadcast applications where downtime is measured in seconds.

The unit comes with female RJ45 input and output connectors. Up to 1,000 feet of CATx cable can separate Host Adapters user stations, including the biggest cable length between the switch and any redundancy of switches for flexible installations of Matrix. The RDSW-PRIMUX supports the 8-32 X and PRIMUX PRIMUX-16 X 64 KVM VGA matrix Switches via CAT5 and all connected PRIMUX-UZR user stations and servers (connected using host adapters).

The VGA KVM Matrix Switch PRIMUX via CAT5 provides non-blocking access for up to 16 simultaneous users for up to 64 servers. The switch frees valuable space by eliminating large and bulky KVM switchboxes Co-axial cables hard to manage. Servers are discovered as they are linked and can be immediately accessed by authorized users. Platform-specific host adapters support a variety of host connections, including PS/2, USB, Sun and Serial. With video resolutions of 1920 x 1440, the unit automatically adjusts video quality to compensate for different lengths of CATx cable. VGA KVM Matrix Switch is an excellent solution for high-density server environments and redundancy switch decreases downtime.

About Network Technologies Inc
Network Technologies Inc (NTI), based in Aurora, OH (USA), is a leading global provider of high quality it infrastructure management solutions. NTI products are used worldwide by leading companies in all sectors, including manufacturing, retail, Government, education, healthcare, financial services, entertainment, worship, transmission and telecommunications. For more information, visit: http://www.networktechinc.com.

View the original article here

Saelig Introduces GaN-on-Silicon MAGIC White LEDs At Significant Cost Advantage

Saelig Company, Inc. has announced MAGIC PLW111010 PLCC-2 SMT white light LEDs. These GaN-on-Silicon LEDs are the first commercially available solid state illuminators manufactured on 6” GaN-on-Silicon substrates.  With production yields of greater than 95% and fast processing times, a significant cost advantage can be offered over Sapphire- and Silicon Carbide-based LED solutions for a wide range of industry-standard solid-state illumination and indicator applications.

Designed for ambient decorative lighting and automotive interior applications, MAGIC PLW111010 PLCC-2 SMT LEDs are high efficiency 465nm blue emitters with phosphor wavelength spreading to provide near-Lambertian distribution with brightness from 360mcd to 1080 mcd.  The 2000-piece reels of LEDs are binned for a single intensity and color to provide close uniformity in manufacturing assembly lines.  The LED’s forward voltage drop is 3.8V at max current of 25mA.

Using standard semiconductor manufacturing processing provides significant cost advantages over ordinary, more expensive LEDs of similar quality which are based on Sapphire or Silicon Carbide technology. MAGIC LEDs are built using a thin 2.5um Gallium Nitride (GaN) layer on a 6-inch silicon substrate, delivering industry-standard performance at a dramatically reduced manufacturing cost.

This SMT package is ideal for backlighting instrument cluster panels and symbols; other applications include decorative lighting, LCD backlights, illumination symbols, navigation and audio system backlighting, large screen displays, etc.

Made by Plessey Electronics, a leading European innovator in the development of integrated circuits and sensors, engineering samples of MAGIC PLW111010 PLCC-2 SMT LEDs are available now, with quantity production in Q4 2013.  Pricing in 10k+ quantities will be under $0.10. For sample availability in North America please contact Saelig Company, Inc. Fairport, NY, Plessey’s USA technical distributor.  For detailed specifications, free technical assistance, or additional information, please contact Saelig 888-7SAELIG.

View the original article here

Ultralife introduces VIPER radio adapter for radio AN/PRC-54 Rifleman.

Communications systems division of the Corporation of 30 July 2013-Ultralife this week presented its new VIPER adapter (vehicle installed power Enhanced Rifleman) to radio AN/PRC-154 Rifleman.

The VIPER brings the widely deployed AN/PRC-154 on the vehicle to use mounted. The VIPER is part-20 watt amplifier 320 popular Ultralife technology for use in military vehicles. The VIPER effectively increases the range of the Rifleman radio and ensures the battle field connectivity, increasing the margin of radio network link.

Ultralife co-developed the VIPER with Thales, Inc., and the VIPER fully supports the radio waveform (SRW) soldier. The characteristics of the VIPER USB standard Ethernet connectivity and integrated and a small form factor: 3.5 cm wide x 5 cm high x 11 cm in length. The VIPER also meets the MIL-STD 810 environmental standards MIL-STD 461 EMI.

For more information or to schedule an interview please contact Scott Schoeffel in 757-419-2439 or sschoeffel@ulbi.com.

View the original article here

TEGAM Introduces New Helicopter Bond Meter

The TEGAM Model R1L-BR1 bond meter is a purpose built, rechargeable battery powered portable instrument for ground bond measurements. The R1L-BR1 comes with BCP-10 Kelvin Probes and KAK-1M Kelvin Alligator Klips, all housed within a ruggedized case for protection during transport.  It has been selected for deployment in support of the Kiowa Warrior Armed Reconnaissance Helicopter. The R1L-BR1 continues the history of excellence established by the inexpensive R1L-B and rugged R1L-BR, which are in inventory at each branch of the US military, and have more than 500 units currently fielded.

TEGAM’s Model R1L-BR1 can be used in a wide variety of applications outside the capabilities of other bond meters, including:

-          Fixed and rotary wing aircraft bond measurements in manufacturing and flight line maintenance operations where its high accuracy produces consistent results.

-          Verifying electromagnetic shield integrity between connector back shells.

-          Measure static discharge wicks for electrical continuity.

-          Inspect conductive coatings for coverage and thickness.  

TEGAM’s Model R1L-BR1 has five ranges with full-scale values ranging from 2 milliohms to 20 ohms.    Resolution on the lowest range is 1 microohm.  Accuracy is 0.25% of reading ± 1 count.  It is fully portable with rechargeable batteries that provide a full day of typical use.  The operating temperature range is 0 °C to 50 °C.

More information about the Model R1L-BR1 Bond Meter Kit is available on the TEGAM website, www.tegam.com (http://www.tegam.com/product.asp?modelNumber=R1L%2DBR1) .  

Price and Availability

The U.S. price for the R1L-BR1 is $2495.00, and units are available for immediate shipment.

About TEGAM

Headquartered just east of Cleveland, Ohio, TEGAM, Inc. specializes in the design, manufacture and support of a wide variety of test, measurement and calibration instruments. TEGAM is the worldwide leading manufacturer of RF power sensor calibration systems for commercial and military applications. Founded in 1979, TEGAM has developed a wide variety of measurement instrumentation and markets its products around the world through a network of technical representatives and distributors in more than 40 countries. TEGAM is internationally recognized for its offering of RF power sensor calibration systems, RF attenuation measurement systems, AC ratio standards and microohmmeters. In addition, the company’s supplies LCR meters, high-voltage amplifiers, MEMS engine driver systems, handheld thermometers, humidity meters and other test and measurement solutions. TEGAM is accredited by A2LA to meet the requirements of ISO/IEC 17025:2005 on Certificate Number 2018.01. For more information, visit www.tegam.com.

View the original article here

Saelig Introduces BOARDMASTER Universal PCB Test System

Saelig Company, Inc. (www.saelig.com (http://www.saelig.com/)) has introduced ABI BoardMaster 8000 PLUS – a unique, versatile, self-contained, and easy-to-use PCB test system.  BoardMaster 8000 Plus is a comprehensive set of test instruments, complete with built-in PC, for testing and fault-finding on almost any kind of PCB.  Incorporating a full range of test instruments in one compact box and offering a variety of available test methods, BoardMaster 8000 PLUS provides a cost-effective standalone solution for electronics faultfinding across a wide range of industries.

BoardMaster 8000 PLUS is an integrated package of high specification instrumentation controlled by sophisticated but easy to use software. The hardware is installed in a rugged transportable case that also contains a high specification, Windows™ PC.  BoardMaster 8000 PLUS is based on a modular system which can be customized for specific applications, and its software can be configured to guide users step-by-step through a test procedure, with custom-annotated picture images, instructions, and attached datasheets to give quick Pass/Fail results.  This is much faster and more economical than using traditional oscilloscope and metering and other bench test methods.

A typical BoardMaster 8000 PLUS configuration offers:

·         Two Board Fault Locator modules, with 128 test channels for multiple test methods for fault diagnosis and functional testing of digital ICs (in-circuit / out-of-circuit), IC connections status, and voltage acquisition, V-I Curve testing of components on unpowered boards.

·         An Analog IC Tester for in-circuit functional testing of analog ICs and discrete components (no programming or circuit diagrams needed). Fully configurable V-I Tester for detection of faults on unpowered boards.

·         A Multiple Instrument Station with 8 high specification test and measurement instruments in one compact module (Frequency Counter, Digital Storage Oscilloscope, Function Generator, Digital Floating Multimeter, Auxiliary PSU, and Universal I/O).  

·         A Triple Output Variable Power Supply provides required supply voltages to the unit under test.

Many repair centers around the world are equipped with BoardMaster 8000 PLUS, offering optimal fault coverage and maintenance capabilities to a wide range of customers. BoardMaster 8000 PLUS is frequently the test instrument of choice in the areas of telecommunications, transportation, and automotive manufacturing.  Many land forces, air force and navy organizations around the globe use BoardMaster 8000 PLUS to provide on-site test and repair, avoiding time-consuming returns to distant repair sites. For less complex or cost-sensitive needs, System8 Modules may be selected and mounted in a PC-driven housing.  Applications include: PCB testing and troubleshooting, digital/analog IC test, digital/analog V-I test, visual short identification with audible/visual indication of probe distance to short, live board comparison, manufacturing defects analysis, power-on/power-off testing, QA reporting, embedded real-time control, calculation and logging, component and board level testing, digital and analog functional tests , automated test sequences, etc.

Made in Europe by ABI Electronics Ltd., a leading embedded test equipment manufacturer, BoardMaster 8000 PLUS is available now from Saelig Co. Inc. Pittsford NY.  A descriptive product video is at youtube.   For detailed specifications, free technical assistance, or additional information, please contact Saelig 1-888-7SAELIG, via email: info@saelig.com, or visit www.saelig.com

View the original article here

Virtual bungee lost + found introduces innovative technology to facilitate the return of lost valuables

Never lost a mobile phone, keys, sunglasses, or a digital camera? Most of us have, and now there is a solution that anonymously facilitates the return of lost valuables safe and easy. Bungee Virtual Lost + Found (http://www.bungeetags.com), a new product that allows owners to anonymously link valuable properties to your cell phone and e-mail, has officially launched. If an element is found, the system is activated by the search engine by sending a simple text message and works immediately to the owner and the search engine in a living anonymous conversation so immediately recovery arrangements can be made.

In the case of a cell phone missing, Bungee also works through anonymous e-mail. All the user's personal information stays safe through Bungee. An entertaining video that describes the effectiveness of the Bungee can be found here: vimeo.com. To help raise additional funds for the growth of the team of Bungee has launched a campaign through Indiegogo (http://www.indiegogo.com/bungee).

"We've tried Bungee in all the United States even dropped a set of keys in Midtown Manhattan on the eve of new year and around 1 received a text message saying that they had found the keys of my and within minutes I had in my hand", said Bryan Davis, co-founder of the Bungee. "Bungee costs only $25 for coverage of life."  Thinking about it, throughout his life say you lose a $300 item and when it returned Bungee will have paid for itself 12 times. Not only in dollars, but in the time of recovery data, frustration... get the point."

So does the Bungee:

·       Once a consumer buys Bungee receive multiple Bungeetags that are in various sizes.  All tags contain a number of personal number/code.

·       Bungeetags are placed in valuables of the owner.

·       If an element is found, the "finder" follow the instructions in the Bungeetag and sends a text message to the Bungee.

·       Bungee then comes into contact with the owner via text message and e-mail and bridges of an anonymous conversation between the two parties to arrange a safe return of lost items.

"The service is simple and affordable and makes little sense for daily consumption, but it is also very important in B2B applications," said AJ Bontempo, co-founder of the Bungee. "We also designed the technology as a white label system.  Trying to reduce the cost of the lost item claims of insurance companies, corporations seeking to improve loss prevention strategies, OEM looking to add that an additional layer of service, safety and many others will benefit from Bungee."

The service is available to consumers through its Web site.  Each package includes 11 Bungeetags to protect valuables. The availability of service includes - 1 year of coverage, $10, or coverage of lifelong, $25.  Both plans include unlimited recoveries and the plan's coverage of life includes free Bungeetags every 2 years for new things.

About Virtual Bungee + found lost
Bungee Virtual Lost + Found (http://www.bungeetags.com) is a new system that allows anonymous people property of the tag and link it to your cell phone and email. If an element is found, the system is activated by the search engine by sending a simple text message and works immediately to the owner and the search engine in a living anonymous conversation so immediately recovery arrangements can be made. The service is available to consumers on the company's web site and can also be white labelling for many B2B applications.  To learn more they sent an email to (info@bungeetags.com)

View the original article here